IPhone activation failed after reset. How to Fix iPhone Activation Failed

Iphone activation failure can occur on different smartphone models. The presented problem can occur due to several reasons. To fix the error, you need to check what influenced its appearance.

There are many explanations why the iPhone owner cannot go through the activation procedure. Below we will study this issue in more detail and try to figure out the solutions to the problem.

Apple server is temporarily unavailable

The presented error will show the user an inscription - the server is temporarily unavailable. That is, it was not possible to get activation information from it. In this situation, your efforts are powerless. Server performance depends entirely on the company. The only way out is to wait until the developers can bring up the servers and get them working.

Information about their work can be obtained on the official website - https://www.apple.com/ru/support/systemstatus/. Active ones are marked in green, and disabled ones are marked in red.

Reset

Iphone activation error after factory reset? When Apple released the updated iOS 11 firmware, it made some changes to its smartphone repair policy. If the phone has undergone repair work, during which defective parts were replaced, then it is important that purely original components are installed in it.

The use of "left" components will definitely block the device after you reset the settings. In this case, it will not be possible to activate the system.

It is worth noting that older versions operating system are not affected by this factor. That is, you can safely reset the parameters without fear that your mobile phone will turn into a "brick". The policy presented has been changed for iOS 11 and 12 only. Refurbished phones should therefore be avoided.

Thus, the company decided to add additional security measures. When the user has reset the settings when the device boots up, the system sends the component information to the Apple Technical Center. If the security system detects non-original parts in the phone that are not in the official database of the company, it will automatically block it.

The solution to the problem is to contact the warranty service.

IPhone hardware issues

Failure to activate the Iphone cellular network may occur due to hardware malfunctions. As an example, we can give a situation when a smartphone cannot find a sim card, and even if it is available, it is in search of a cellular network. The lock cannot be removed without connection. It is required to diagnose the smartphone in the service.

IOS 11 Activation Issue on Refurbished Phones

Owners of phones that have been previously refurbished are more likely than others to suffer from activation problems. The presented problem affected only new firmware versions, starting with iOS 11.

It is not recommended to purchase phones from dubious sellers. They will not give iron guarantees for the originality of components, possibly in this device Chinese and low-quality parts were used. Such gadgets outwardly completely copy the real IPhone, differing from them in system parameters.

Also, users who have not original components installed in the repair service fall under the risk category. Therefore, if you decide to reset the parameters, then when the system starts, the data about the installed components will be transferred to the Apple servers, after which the blocking will follow.

Activation lock is set

Sometimes, using marketplaces for private ads, for example, Avito, there may be problems with activation. This means that the previous owner of the gadget did not change the account. Contact him to resolve the issue.

SIM card not supported

Failure to activate the iPhone can occur if the gadget cannot identify the installed SIM card. Check if it is the correct size and is correctly inserted into the connector.

Internet connection problems

The next reason implies an unstable internet connection. In other words, it is not possible to contact the server to which the information from your smartphone should be received. Check the stability of the mobile network. It is recommended to connect to Wi-Fi to solve the problem.

What to do if iPhone 4 / 4s / 5 / 5s / 6 / 6s / 7 / X activation fails

If the service notifies you about technical server problems, then the only way out is to wait for the servers to work again.

If activation is blocked, then the previous user did not change accounts and did not delete data from his iCloud. The presented security measure was developed in case of theft of a smartphone. To unlock the gadget, you need to specify the ID and code associated with the old account (previous owner). It is also necessary to erase the account, replacing it with a new one.

The second solution to blocking activation involves a call to AppleCare, where specialists will help with the question if the user can prove that the Iphone belongs to him.

Update required

Sometimes an error can occur due to an old firmware version. After Iphone activation fails, update is required. It is required to timely install patches released by developers. Check the settings for new updates. If this malfunction does not allow you to download the update, then you can try to activate the system through iTunes.

SIM card check

Check if the SIM card is installed correctly. Doesn't fit in your phone? Contact the operator to obtain the desired SIM card option. If, after checking, no problems were found with the SIM card, then most likely the reason is hidden in a hardware failure.

Reboot

In some situations, a reboot or reset may help. IPhones reboot when you hold down the Home and Screen Off buttons.

Mobile network blocking check

Check if your mobile network... Possibly the reason is related to poor online connection. Use Wi-Fi.

Activation via iTunes

Activation can also be done using iTunes. Instructions:


The most common problem with an iPhone can be the appearance of error 0xe8000013, which notifies that activation has failed in the phone.

Why does iOS 11 activation error appear?

Activation failed iPhone iOS 11 can happen for several reasons. The most common is considered to be a failure in the Apple service. This happens when replenishment is made with new available types of settings.

At the same time, too many users try to take advantage of additional features, which leads to some disruption. An equally common occurrence is the impossibility of activating an unlicensed device.

Is it possible to fix an iPhone with error 0xE8000013 in the service

If a failure occurred after the firmware or with a phone that worked normally before, specialists can try to restore the settings or replace the faulty modem.

But at the same time, one should take into account the fact that not all services and specialists take on the elimination of such a malfunction.

How to check iPhone for error 0xE8000013

It is very easy to check any iPhone for an iOS 11 activation error, for this you will have to use the Apple service, manipulations are performed in the following sequence:

  1. We go to the company's website and select the item: "Checking service rights";
  2. Enter the serial number or IMEI combination in the appropriate field.
  3. After the data has been entered, the Apple website should display information about your phone with the specified purchase date, activation and service period.

Note: be sure to check the data received in the phone itself with the serial combination on the iPhone packaging, if the numbering does not match, they are trying to sell you an unlicensed product, that is, a fake


How to solve the problem with activating iPhone with iOS 11: possible options

You can try to fix the iOS 11 activation failure in several ways, although no one will give clear guarantees of any of the methods, because it all depends on the causes of the problems.

Reboot the device

In some cases, to fix iPhone iOS 11 activation error, simply restart the phone device. To reboot in the first way, you must simultaneously press the buttons "Home" and "Power", hold for about ten seconds.

Then the device is turned on again, if the problem was related to the quality of the firmware, this method can help. Using the second method, you need to press the same buttons, but hold them for only three seconds. At the same time, they monitor the screen and at the moment when it goes out, turn on the phone.

Change of network

Since iOS 11 only started functioning in 2017, some carriers may drop the activation request.

Therefore, if the activation of iPhone iOS 11 fails, the solution may be to change the network. To do this, simply change the SIM card to a card of another operator and turn on the communication means.

Note: It happens that the cause of a problem with activation is a faulty SIM card or its absence. Despite the fact that this reason seems almost absurd, sometimes it happens.

Activation via iTunes

Activating iOS 11 error today is possible with the help, for this latest version the player must be installed on the computer.

After that, you need to turn on the phone and connect it to the computer, iTunes should recognize the communication tool and activate it.


Recovering the device to fix the failure

When to fix activation error on iOS 11 no longer in simple ways, you can use another launch option using iTunes.

To do this, insert a SIM card, turn on the device, hold down the "Home" button and, without releasing it, connect the phone to the computer.

Holding the "Home" button allows the program to recognize the telephone device in a special mode, while you just need to confirm the restoration.

Devices with activation issue on iOS 11

Bugs when activated on iOS 11 are possible on any device, the fact is that with excellent advertising and many advantages, the software still has its flaws.

Many people make the mistake of rushing to change the firmware as soon as it appears, over time any service will improve, but initially it is released in a rather "raw" version.

Activation Failed on iPhone 5S iOS 11

Such a problem with 5S, for which the latest software version is used, is not uncommon, as are the device freezing, communication interruptions, fast discharge and many other side effects of a powerful service.

IPhone 6/6 Plus activation error

It is solved in standard ways, it may arise due to failures in the system itself, incompatibility with the SIM card and some other problems.

The search for a solution to the problem is carried out taking into account the information about the error.


IPhone 6S / 6S Plus activation failed

Most often it is characterized by the error 0xe8000013 iOS 11, which occurs in refurbished phones, if the procedure was not carried out in an official service center using non-original parts.

IOS 11 activation fails on iPhone 7/7 Plus

In this device, activation problems can occur due to reset from the operator, when the product is out of service, that is, it is fake, or when the system is too busy.

IOS 11 activation fails on iPhone 8/8 Plus

It happens when the device was repaired or flashed not in a specialized service, after unauthorized interventions, the installation is simply blocked by iOS 11 itself.

The solution can only be a repeated appeal to the "leftist" specialist, who in rare cases can find a way out.

IPhone X activation error (ten)

Apple rejects any possibility of failures for this model, citing the fact that activation is impossible only in case of irrelevant flashing or restoration with "non-native" spare parts.

But in reality, start-up failure can occur even with almost new devices.

IPad on iOS 11 activation failure and Apple's solution

Apple has not yet found a solution to the iPad iOS 11 activation failure, or to be more precise, the problem has not been officially recognized.

Therefore, seeking technical support does not give any results. You can simply use the methods suggested by users to start.

When will the activation error on iOS 11 be completely fixed

Bugs with functioning and activation, Apple promises to fix it before the spring of 2018, but new additions threaten with new troubles, such as the impossibility of rollback, although it is a rollback that can be a lifesaver for cases when a bug is difficult to fix.

Buying a device from Apple is a joyous event. But after the first switching on of the device, the user may encounter a number of problems. For example, with the activation of the gadget. Not everyone knows about this operation. We have to figure out how to activate the iPhone 5S. What does it take to bring an idea to life? If you carefully follow the simplest instructions, as well as read the text on the phone display, you will be able to do this as soon as possible. Where to begin?

What will come in handy

Let's start with preparation. IPhone 5S activation is impossible without a few details. Users usually have no problem preparing for activation. In particular, Apple lovers.

In general, this will require:

  • SIM card;
  • Wi-Fi network connection (or a computer with the Internet and iTunes);
  • power supply;
  • phone charger;
  • a clip for a SIM card;
  • USB cable.

This will be enough to activate the "apple" device in any way. Getting the iPhone 5S to work isn't that hard. Next, we will look at the activation procedure in detail.

Activation stages

How to activate iPhone 5S? More on this later.

First, you should pay attention to the fact that this process consists of several stages. Namely:

  • turning on;
  • selection of basic phone settings;
  • direct activation;
  • launching the device for the first time.

We will definitely be able to find out about all these stages further. Everyone can easily get started with the iPhone 5S.

Sim card

The first thing to do is insert a SIM card into your phone. "Apple" devices have distinguished themselves in this regard. They provide for a special process for connecting a SIM card.

How exactly should you proceed? The owner of an "apple" phone needs:

  1. Take a SIM card clip.
  2. Insert the mentioned component into the special hole on the side panel of the smartphone.
  3. Click on the paperclip.
  4. Remove the SIM card slot.
  5. Insert SIM-card into slot.
  6. Return the component back to the phone.

Turning on the device

The next step is to turn on the smartphone. To do this, the user must first connect the device to a charger and plug into an outlet. With zero (or minimum) battery power, activation will not be possible. It will simply be interrupted. To successfully cope with the task, you need to have a charge of at least 20-30%.

How to activate iPhone 5S? On the top panel of the "apple" phone, you must press the power button. After holding it down for several seconds, the device will start.

If everything is done correctly, a silver apple will light up on the display. This is a sure sign that it's time to start the next step.

Basis

Man bought a phone from Apple? The iPhone 5S, like any other "apple" device, will have to be activated. Otherwise, it will not be possible to work with him. Fortunately, everything is not as difficult as it seems at first glance.

Activation instructions for iPhone 5S are broken down into several simple steps. After turning on the device, you will have to set the basic phone settings. It is proposed to do this as follows:

  1. Swipe from left to right across the bottom of the display. You need to do this when the welcome screen lights up. It will say "Hello" in different languages.
  2. Select the desired system language. It is enough to tap on the corresponding line.
  3. Indicate the country of residence of the citizen.
  4. Connect to the Internet. For example, by clicking on the "Select network" hyperlink, and then specifying one or another Wi-Fi.

By the way, the connection to the network must be taken very carefully. After all, the further activation of the iPhone 5S will depend a little on this. First, let's look at the situation with connecting to Wi-Fi. This is the most common layout.

Basic actions

How to activate iPhone 5S with SIM card? As soon as the user connects to the Internet, a form for filling out will be available to him. With its help, the phone will be configured for the first time.

The iPhone activation guide looks like this:

  1. Turn geolocation on or off. To do this, click on the appropriate line.
  2. Select the "Like new" option.
  3. Create an AppleID profile.
  4. Click on the "I agree" button. It is located at the bottom right of the display.
  5. Click on "Install Now" and place your finger on the highlighted area on the screen. This step can be postponed. It is enough to click on the corresponding button.
  6. Set a password for working with the "apple" device.
  7. Click on the "Allow to send data to the Apple server" or "Do not allow" button. It all depends on personal preference.

Ready! If everything is done correctly, the message "Welcome!" Will appear on the screen. She will inform you about the successful activation of the device. But what if there is no Wi-Fi network? Then you will have to carry out the procedure through a computer.

iTunes, PC and iPhone

In reality, everything is much simpler than it might initially seem. We already know how to activate your iPhone 5S. If the user cannot find a WI-Fi network, he will have to carry out the procedure using a computer or laptop.

Under these circumstances, it all starts with installing a program called iTunes. All owners of Apple gadgets should have it. You will have to download the latest version of the program. Otherwise, the application may crash.

The iTunes installation file is downloaded from any available source, after which the exe-document is launched on the computer. The installation wizard is activated. Following the instructions on the screen, the person will be able to complete the initialization of the software. It's completely free.

PC connection

How to activate iPhone 5S without SIM card? You can operate through a computer and "ITunes". This technique also helps to cope with the task if there is no Wi-Fi connection.

It is necessary to correctly connect the "apple" device from "Apple" to the computer. How it's done?

The instruction of the following type will help to cope with the task at hand:

  1. Take a USB cable.
  2. Insert one end of the cable into a suitable connector on your phone.
  3. Plug the other end of the cord into a USB port on your computer.
  4. Launch iTunes.
  5. Wait a bit.

Thus, not only the connection will occur, but also the synchronization of the devices. It is very convenient. Especially considering that now the user will be able to activate the iPhone 5S without much difficulty.

What exactly should you do? Follow the instructions on the screen. They are no different from the steps listed earlier. The only difference is that when connecting via a PC, you do not need to insert a SIM into the device, and there is also no need to turn on Wi-Fi.

Without iTunes

How to activate an iPhone 5S if a person does not have a SIM card? Problems may arise with this operation. Especially if the user doesn't want to work with iTunes.

It is almost impossible to cope with the task without a SIM card. Although experts recommend working with ITunes to bring the idea to life. Or you should follow the instructions below.

It has approximately the following structure:

  1. Switch on the phone.
  2. Press the Home button on your mobile device.
  3. Select the "Emergency call" item.
  4. Dial "112".
  5. Press the call button of the subscriber.
  6. Click on the "Turn off" button.
  7. Select the "Cancel" option.
  8. End the call.

It is done! The user will now have a fully working device. But, as a rule, sometimes iPhone activation fails. What difficulties can you face under certain circumstances?

Problems

Apple smartphones are the most common technique. High quality, but even it sometimes fails. What difficulties can users face when thinking about how to activate the iPhone 5S?

The following situations and ways of solving them can be distinguished:

  1. If you do not remove the film from mobile device, the "Home" button will be badly pressed. Because of this, blocking of the device is not excluded. Everything is solved simply - you can press the "Enable" button on the gadget when auto-blocking.
  2. There is no Wi-Fi connection. In this case, only connecting the "apple" mobile phone to a computer with iTunes will help to cope with the task.
  3. Problems with device synchronization. They usually disappear if you update iTunes on your computer.
  4. ITunes update failed. Removing it is as easy as shelling pears. It is enough to first close the application completely. Only then is it allowed to update.
  5. Impossibility of taking fingerprints. To accomplish this task, you need to remove the factory protective film from the screen. With her, the above operation will not work. The sensor simply won't be able to recognize fingerprints.

These are the most common problems. Now it is clear how to deal with them. Activating iPhone is no longer a hassle or hassle.

Outcomes

We figured out how to get the apple phone to work the first time. The instructions below will help you activate any iPhone. The main thing is to properly prepare for the procedure.

At first, you can opt out of creating an AppleID. Without this profile, the owner of the phone simply won't be eligible to use Apple's services. For example, iCloud or AppStore. Therefore, it is advisable to immediately start AppleIde.

Not so long ago, the iPad 2 was updated to iOS 9.3, after which there were problems with activating the tablet, and users began to complain: "I can not turn on the iPad when I activate it after the update." At the same time, at the start of the device, a record appears that the iPad could not be activated due to the fact that activation is temporarily unavailable. Why does the system message appear: "Your iPad could not be activated" and what should I do in this case?

This problem gave rise to options for solutions. In particular, when there is a problem with activation, you can try using iTunes to repeat the update of the operating system to the same version of iOS 9.3.

To do this, reconnect the two devices, a tablet and a computer, via a USB cable and run iTunes, updated to the latest version, on the PC. If you have not the latest version installed, then update the program. After all the devices are connected and the programs are activated, force restart the iPad by pressing the "Power" button and at the same time the "Home" button to restart the device. While doing this, hold down the buttons until the screen starts up in recovery mode. After that, a menu with actions to restore or update the iPad will appear on the display. You select the "Refresh" command using iTunes.

In this case, iOS will be reinstalled through iTunes, and the data on the iPad will remain. If the reinstallation process is delayed, then the recovery mode on the iPad may stop, and then the procedure must be repeated again. After the iPad is restored, do not turn off the iPad, but use iTunes to complete the activation process.

It so happens that after installing an update on the iPad, iTunes does not see the iPad and cannot connect, so just disconnect the iPad from the computer and turn it on again. If the problem persists, try completing iPad activation on a different computer.

Another fairly common software error that occurs after the iPad update or restore process is the appearance of a crash and the appearance of a message upon activation that the iPad does not turn on and does not activate due to the fact that it is not possible to access the server. In this case, you can duplicate the activation attempt after a while. If not, you can contact Apple.com for assistance.

How to fix activation error

If after updating iPad firmware a connection error occurs and you do not know what to do, check your Internet network. Perhaps the failure occurred due to a poor-quality WI-FI connection. Try rebooting your router, as the subnet address may change during the reboot process. Also try to connect via a different network and re-activate the activation procedure.

Often times, iPad activation can fail due to poor performance of Apple servers, so it would be reasonable to try again after a while using the already proven method. If the error persists, try restarting the iPad and starting the activation again. Alternatively, launch the iPad through iTunes on your PC.

If all of the above methods did not work and you still have a system message: "Activation Error", try flashing again using DFU mode. This is because the firmware is not flat and is therefore causing the software to crash. Otherwise, the reason for the non-starting iOS may be in the inner part of the iPad, or perhaps the iPad was simply blocked, since the previous owner did not remove the "Find iPad" option during the sale and now you need to enter the password and device ID.

How to start DFU mode on iPad

This iPad startup mode is significantly different from the usual tablet reboot in Recovery mode. It flashes the operating system directly, bypassing iOS. Using DFU mode, you will be able to reset the system crash caused by jailbreak.

To start this mode, open your computer and deactivate iTunes on it. Connect your iPad and computer with a USB cable. Then turn off the iPad completely by holding down the Power button for a long time. Next, press the Home button and the Power button together, holding for about 10 seconds, and then release the Power button, and continue to hold the Home button for 10-15 seconds until the USB cable is displayed. If the icon does not appear, then hold the button longer.

"I keep getting a message that the iPhone X cannot be activated because the server is temporarily unavailable. How long can I wait for this, or is there a problem with my iPhone X?"

Many people report on Twitter or Facebook that they are experiencing iPhone X activation failure. Activation issues are not limited to iPhone XS / XR / X, but also iPhone 8 / 8Plus / 7 / 7Plus or even earlier iPhone / iPad. They happen from iPhone / iPad after updating to iOS 11/12. Here are some common reasons why you were unable to activate your iPhone and how to fix the problems.

Part 1. Why iPhone X Can't Be Activated

Carrier operators

You cannot activate iPhone on iPhone X when your carriers are experiencing some errors. IPhone X activation issues mostly occur with AT&T and Verizon customers in the US.

Activation server is temporarily unavailable

iPhone X cannot be activated because the activation server is down / temporarily unavailable. Apple's server is used to check if your device can be activated. It can experience significantly more traffic these days and it drops. You can check if it falls or not

SIM card is not supported.

iPhone X won't activate because SIM is invalid / supported.

Internet or iPhone X issue

The activation process could not be completed because the internet connection or iPhone X is poor.

Activation lock installed

You cannot activate iPhone X because it is linked to a previous owner account, for example linked to another's iCloud account with an Activation Lock set. It's rare when you get a brand new iPhone X.

Part 2. Ways to Fix Activation Issues with iPhone X

If you were unable to activate the Phone on iPhone X, or the warning says that the activation server is unavailable or the SIM card is invalid or not supported, how to fix the deactivated iPhone X? Here are a couple of ways.

Method 1. First, do the following checks

1. You cannot activate iPhone X without a SIM card. So check if the SIM card is inserted.

2. If the error says "No SIM card" or "Invalid SIM", please insert the SIM card, because your SIM card may not sit in the right place,

3. Check if your Wi-Fi network is working well.

4. Review the list on the Apple System Status page to see if the checkbox is enabled when activated iOS devices... If not, wait a while and try activating iPhone X later.

Method 2. Turn off activation lock

If you are asked to enter a passcode when trying to activate your iPhone X, Activation Lock can be enabled by the former user in Find My iPhone to protect data in the event of theft (this can happen with some used iPhones. As I said, this rarely happens with the new iPhone X ). To unlock iPhone X, you need to enter your old login password and remove the lock in Find My iPhone.

Method 3. Restart iPhone

You can try restarting your iPhone X to see if it works.

1. Press and hold the side button and the volume up or down button until a slider appears.
2. Drag the slider to turn off the iPhoneX.
3. After the iPhone X is turned off, press and hold the side button again until you see the Apple logo.

Method 4. Activating iPhone using iTunes

If all methods fail, you can try activating iPhone X through iTunes. Follow the steps:

1. Make sure you have installed the latest version of iTunes on your PC / Mac.
2. Connect iPhone X to your computer and launch iTunes.
3. Once iTunes detects your iPhone, it will show “Set up as new” or “Restore from backup”, which means iTunes has activated your iPhone. If an error in iTunes says the SIM card is not compatible, contact your carrier.


Method 5. Fix iPhone Activation Failed Using Reiboot Tool

IPhone activation failed, what to do? Our utility can fix this problem.


Method 6. Contact Apple

If the tips above don't work, there may be a problem with the iPhone X itself. You can call Apple for a replacement or repair if it's under warranty.

Conclusion

I sincerely hope that the 5 methods above can solve your problem and you have an activated iPhone X. Read about the new features and specifications of the iPhone X to get familiar with your new iPhone. If you are having problem using iPhone X like black screen, Apple logo, crash, etc. Tenorshare ReiBoot is advised to fix all kinds of iOS problems without data loss.